High density 95WNiFe Tungsten heavy alloy non-standard bar e nang le khanyetso e ntle ea ho roala
1. Tlhaloso ea sehlahisoa:
Thepa:
- Boima bo phahameng: 16.8-18.8g/cm3
- Lintho tse ntle tsa mochini
- Modulus e phahameng ea elasticity
- Ho monya mahlaseli
- High thermal le motlakase conductivity
- Ho hanyetsa mocheso o phahameng
- Katoloso e tlase ea mocheso
Kereiti eaHigh density 95WNiFe Tungsten heavy alloy non-standard bar e nang le khanyetso e ntle ea ho roala
| Boitsebiso 1 | Sehlopha sa 1 | Sehlopha sa 2 | Sehlopha sa 3 | Sehlopha sa 4 |
| Tungsten % | 90 | 92.5 | 95 | 97 |
| Boima ba 'mele (g/cc) | 16.85-17.25 | 17.15-17.85 | 17.75-18.35 | 18.25-18.85 |
| Ho thatafala (HRC) | 32 | 33 | 34 | 35 |
| Utimate Tensile Matla | ksi | 110 | 110 | 105 | 100 |
| Mpa | 758 | 758 | 724 | 689 |
| Kotulo ea Matla ho 0.2% off-set | ksi | 75 | 75 | 75 | 75 |
| Mpa | 517 | 517 | 517 | 517 |
| Elongation (%) | 5 | 5 | 3 | 2 |
| Boitsebiso 2 | Sehlopha sa 1 | Kereiti 2 | Sehlopha sa 3 | Sehlopha sa 4 |
| Sebopeho | 90W7Ni3Fe | 92W5Ni3Fe | 95W3Ni2Fe | 97W2Ni1Fe |
| Boima ba 'mele (g/cm3) | 17.1±0.15 | 17.50±0.15 | 18.10±0.15 | 18.50±0.15 |
| Kalafo ea Mocheso | Sintering | Sintering | Sintering | Sintering |
| Tensile Strength (Mpa) | 900-1000 | 900-1000 | 920-1100 | 920-1100 |
| Elongation (%) | 18-29 | 16-26 | 10--22 | 6--13 |
| Ho thatafala (HRC) | 24-28 | 25-29 | 27-32 | 28-36 |
| Boitsebiso 3 | Sehlopha sa 1 | Sehlopha sa 2 |
| Sebopeho | 90%W, | 95%W, |
| 6%Ni4%Cu | 3.5%Ni |
| 1.5% Cu |
| Boima ba 'mele (gm/cc; lbs/in3) | 17;0.614 | 18;0.65 |
| Ho thatafala (RC) | 24 | 27 |
| Ultimate Tensile Strength (PSI) | 110,000 | 110,000 |
| Kotulo Matla, . 2% Offset (PSI) | 80,000 | 85,000 |
| Elongation (% In 1“) | 6 | 7 |
| Proportional Elastic Limit (PSI) | 45,000 | 45,000 |
Li-tungsten alloy rods, WNiFe le WNiCu, li entsoe ka phofo ea tšepe ka mocheso o itseng o phahameng, ho sebelisoa theknoloji e khethehileng ea phofo ea metallurgy. Ka tsela ena, thepa ea tungsten alloy rod e na le coefficient e tlase ea katoloso ea mocheso, conductivity e ntle ea mocheso le thepa e ntle ea thepa.
2. Mabapi le motsoako o boima oa Tungsten:
Ka mocheso o phahameng, molamu oa tungsten alloy o sebetsa e le ntho e nang le ntlha e phahameng ea ho qhibiliha le coefficient e tlaase ea ho atolosa mocheso. Keketso ea tungsten alloy element e ntlafatsa machinability, toughness le welding. Thepa ea thepa e hahiloe holim'a lithupa tsa alloy tungsten indastering ea tlhahiso ho felisa mathata a amanang le phekolo ea mocheso oa lisebelisoa tse ling tsa lisebelisoa.
3. Likopo :
Ho leka-lekana bakeng sa VibrationDampening
Libaka tse laolang lifofane
Helicopter rotor Systems
Likarolo tsa enjene
Indasteri ea mabelo a likoloi
Li-ballast tsa sekepe
Boima ba sehlopha sa golf
Libetsa tsa mollo
Ho rema lifate ka mekoting e ka tlaase - Li-bars tsa Sinker
Lijo tse monate
Kopo ea Ordnance
4.Melemo: tungsten e hloekileng
- Lisebelisoa tsa ho ikopanya le li-electrode
- Karolo ea sebōpi sa mocheso o phahameng
- Sekoahelo sa hlooho
- elektrode ea EDM
- Khokahano ea Arc
Melemo: Tungsten e boima
- Ho leka-lekanya boima
- Lisebelisoa tse nkelang sebaka sa Uranium
- Electroheat e senyang li-anvil block
- Libolo ka bomo
- Ho kopana le motlakase o phahameng
- Ho tšoasa litlhapi
Ke Hobane'ng ha U Re Khetha:
1. U ka fumana boitsebiso bo phethahetseng ho ea ka tlhokahalo ea hau bonyane theko e ka khonehang.
2. Re boetse re fana ka Reworks, FOB, CFR, CIF, le litheko tsa ho fana ka ntlo le ntlo. Re fana ka tlhahiso ea hore u etse tumellano ea ho tsamaisa thepa e tla u baballa haholo.
3. Thepa eo re fanang ka eona e ka netefatsoa ka botlalo, ho tloha ho setifikeiti sa tlhahlobo ea thepa e tala ho isa polelong ea ho qetela.(Litlaleho li tla hlaha ho latela tlhoko)
4. tiisetso ea ho fana ka karabo nakong ea lihora tse 24(hangata ka hora e tšoanang)
5. U ka fumana mefuta e meng ea li-stock, ho tsamaisoa ha leloala ka ho fokotsa nako ea tlhahiso.
6. Re inehetse ka ho feletseng ho bareki ba rona. Haeba ho ke ke ha khoneha ho finyella litlhoko tsa hau ka mor'a ho hlahloba likhetho tsohle, re ke ke ra u khelosa ka ho etsa litšepiso tsa bohata tse tla theha likamano tse ntle tsa bareki.
Pontšo ea feme
ITEANYE LE RONA
info@zztungsten.com
