Yakakwira density 95WNiFe Tungsten inorema alloy isiri-standard bar ine yakanaka kupfeka kuramba
1.Product tsananguro:
Properties:
- High Density : 16.8-18.8g/cm3
- Yakanaka michina zvinhu
- Yakakwira modulus ye elasticity
- Radiation Absorption
- High thermal uye magetsi conductivity
- High tembiricha kuramba
- Low thermal kuwedzera
Giredhi reYakakwira density 95WNiFe Tungsten inorema alloy isiri-standard bar ine yakanaka kupfeka kuramba
| Material 1 | Kirasi 1 | Kirasi 2 | Kirasi 3 | Kirasi 4 |
| Tungsten % | 90 | 92.5 | 95 | 97 |
| Density (g/cc) | 16.85-17.25 | 17.15-17.85 | 17.75-18.35 | 18.25-18.85 |
| Kuoma (HRC) | 32 | 33 | 34 | 35 |
| Utimate Tensile Simba | ksi | 110 | 110 | 105 | 100 |
| Mpa | 758 | 758 | 724 | 689 |
| Goho Simba pa 0.2% off-set | ksi | 75 | 75 | 75 | 75 |
| Mpa | 517 | 517 | 517 | 517 |
| Elongation (%) | 5 | 5 | 3 | 2 |
| Material 2 | Grade 1 | Giredhi 2 | Grade 3 | Grade 4 |
| Composition | 90W7Ni3Fe | 92W5Ni3Fe | 95W3Ni2Fe | 97W2Ni1Fe |
| Density (g/cm3) | 17.1±0.15 | 17.50±0.15 | 18.10±0.15 | 18.50±0.15 |
| Kupisa Kurapa | Sintering | Sintering | Sintering | Sintering |
| Tensile Strength (Mpa) | 900-1000 | 900-1000 | 920-1100 | 920-1100 |
| Elongation (%) | 18-29 | 16-26 | 10--22 | 6--13 |
| Kuoma (HRC) | 24-28 | 25-29 | 27-32 | 28-36 |
| Zvinyorwa 3 | Grade 1 | Grade 2 |
| Composition | 90%W, | 95%W, |
| 6%Ni4%Cu | 3.5%Ni |
| 1.5% Cu |
| Density (gm/cc; lbs/in3) | 17;0.614 | 18;0.65 |
| Kuoma (RC) | 24 | 27 |
| Ultimate Tensile Strength (PSI) | 110,000 | 110,000 |
| Goho Simba, . 2% Offset (PSI) | 80,000 | 85,000 |
| Elongation (% In 1“) | 6 | 7 |
| Proportional Elastic Limit (PSI) | 45,000 | 45,000 |
Tungsten alloy tsvimbo, WNiFe uye WNiCu, inogadzirwa kubva kusimbi poda pane chaiyo tembiricha yakakwira, uchishandisa yakakosha tembiricha yehupfu simbi tekinoroji. Nenzira iyi, tungsten alloy rod zvinhu zvine yakaderera thermal yekuwedzera coefficient, yakanaka yekupisa conductivity uye yakanaka zvinhu zvinhu.
2. Nezve Tungsten inorema alloy:
Pakupisa kwepamusoro, iyo tungsten alloy tsvimbo inoita sechinhu chine yakakwira kunyungudika uye yakaderera coefficient yekuwedzera kwekupisa. Kuwedzerwa kwe tungsten alloy element inovandudza machinability, kuoma uye welding. Zvinhu zvezvinhu zvakavakwa pa tungsten alloy rods muindasitiri yekugadzira kubvisa matambudziko ane chekuita nekupisa kurapwa kwezvimwe zvishandiso zvekushandisa.
3. Zvikumbiro :
Counter balance yeVibrationDampening
Nzvimbo dzekudzora ndege
Helicopter rotor Systems
Injini zvikamu
Auto racing industry
Ship ballasts
Zviyereso zvegorofu
Maoko emoto
Pasi gomba kutema-Sinker mabara
Mabhawa anofinha
Ordnance application
4.Advantages: tungsten yakachena
-Kubata uye electrode zvinhu
- High tembiricha choto chikamu
- Musoro singi
- EDM electrode
- Arc kuonana
Zvakanakira: Tungsten inorema
- Kuenzanisa uremu
- Substitutional zvinhu zveUranium
- Electroheat inogumbura anvil block
- Mabhora mubhomba
- High voltage magetsi kusangana
- Kubata hove
Sei Tisarudze:
1. Unogona kuwana zvinhu zvakakwana maererano nezvaunoda pamutengo wakaderera.
2. Isu tinopawo Reworks, FOB, CFR, CIF, uye mitengo yekutumira pamusuwo kumasuo. Tinokupa zano kuti uite dhiri yekutumira iyo inove ine mari.
3. Zvishandiso zvatinopa zvinonyatso zivikanwa, kubva pagwaro rebvunzo retifiketi kusvika kune yekupedzisira dimensional statement. (Mishumo icharatidza pane zvinodiwa)
4. vimbiso yekupa mhinduro mukati memaawa makumi maviri nemana (kazhinji muawa imwe chete)
5. Unogona kuwana dzimwe nzira dzemasheya, zvigayo zvekutakura nekuderedza nguva yekugadzira.
6. Isu takazvipira zvizere kune vatengi vedu. Kana zvisingabviri kuzadzisa zvaunoda mushure mekuongorora zvese zvingasarudzwa, isu hatizokunyengedzi nekuita zvipikirwa zvenhema izvo zvinogadzira hukama hwakanaka hwevatengi.
Kuratidzwa kwefekitari
TAURA NESU
info@zztungsten.com
