High kachulukidwe 95WNiFe Tungsten heavy alloy non-standard bar yokhala ndi kukana kwabwino
1.Kufotokozera kwazinthu:
Katundu:
- Kuchuluka Kwambiri: 16.8-18.8g/cm3
- Zabwino zamakina
- High modulus ya elasticity
- Mayamwidwe a radiation
- High matenthedwe ndi magetsi madutsidwe
- Kukana kutentha kwakukulu
- Kuwonjezeka kochepa kwa kutentha
Gulu laHigh kachulukidwe 95WNiFe Tungsten heavy alloy non-standard bar yokhala ndi kukana kwabwino
| Zinthu 1 | Kalasi 1 | Kalasi 2 | Kalasi 3 | Kalasi 4 |
| Tungsten% | 90 | 92.5 | 95 | 97 |
| Kachulukidwe (g/cc) | 16.85-17.25 | 17.15-17.85 | 17.75-18.35 | 18.25-18.85 |
| Kulimba (HRC) | 32 | 33 | 34 | 35 |
| Kugwiritsa Ntchito Mphamvu Zolimbitsa Thupi | ksi | 110 | 110 | 105 | 100 |
| Mpa | 758 | 758 | 724 | 689 |
| Zokolola Mphamvu pa 0.2% off-set | ksi | 75 | 75 | 75 | 75 |
| Mpa | 517 | 517 | 517 | 517 |
| Elongation (%) | 5 | 5 | 3 | 2 |
| Zinthu 2 | Gulu 1 | Gulu 2 | Gulu 3 | Gulu 4 |
| Kupanga | 90W7Ni3Fe | 92W5Ni3Fe | 95W3Ni2Fe | 97W2Ni1Fe |
| Kuchulukana (g/cm3) | 17.1±0.15 | 17.50±0.15 | 18.10±0.15 | 18.50±0.15 |
| Kutentha Chithandizo | Sintering | Sintering | Sintering | Sintering |
| Tensile Strength (Mpa) | 900-1000 | 900-1000 | 920-1100 | 920-1100 |
| Elongation (%) | 18-29 | 16-26 | 10--22 | 6--13 |
| Kulimba (HRC) | 24-28 | 25-29 | 27-32 | 28-36 |
| Zinthu 3 | Gulu 1 | Gulu 2 |
| Kupanga | 90%W, | 95%W, |
| 6%Ni4%Cu | 3.5%Ni |
| 1.5% Ku |
| Kachulukidwe (gm/cc; lbs/in3) | 17;0.614 | 18;0.65 |
| Kulimba (RC) | 24 | 27 |
| Ultimate Tensile Strength (PSI) | 110,000 | 110,000 |
| Kupereka Mphamvu, . 2% Offset (PSI) | 80,000 | 85,000 |
| Kutalikira (% Mu 1“) | 6 | 7 |
| Proportional Elastic Limit (PSI) | 45,000 | 45,000 |
Ndodo za aloyi ya Tungsten, WNiFe ndi WNiCu, amapangidwa kuchokera ku ufa wachitsulo pa kutentha kwakukulu, pogwiritsa ntchito luso lapadera la kutentha kwazitsulo. Mwanjira iyi, tungsten alloy ndodo zakuthupi zimakhala ndi mphamvu yowonjezereka yamafuta ochepa, matenthedwe abwino amafuta ndi zinthu zabwino zakuthupi.
2. Za aloyi wolemera wa Tungsten:
Pakutentha kwambiri, ndodo ya alloy ya tungsten imakhala ngati chinthu chokhala ndi malo osungunuka kwambiri komanso otsika kwambiri owonjezera kutentha. Kuphatikiza kwa tungsten alloy element kumathandizira machinability, kulimba komanso kuwotcherera. Zomwe zimapangidwira zimamangidwa pazitsulo za tungsten alloy mu mafakitale opanga kuti athetse mavuto okhudzana ndi kutentha kwa zipangizo zina.
3. Mapulogalamu :
Counter balance for VibrationKuchepetsa
Malo owongolera ndege
Helicopter rotor Systems
Zigawo za injini
Makampani othamanga magalimoto
Sitima zapamtunda
Zolemera za kalabu ya gofu
Zida zamoto
Kudula mitengo pansi - Mipiringidzo ya Sinker
Mipiringidzo yotopetsa
Ntchito ya Ordnance
4.Zabwino: tungsten yoyera
- Zolumikizana ndi ma electrode
- Chigawo cha ng'anjo yotentha kwambiri
- Kuzama kwamutu
- EDM electrode
- Kulumikizana kwa Arc
Ubwino: Tungsten yolemera
- Kulinganiza zolemera
- Zida zolowa m'malo mwa Uranium
- Electroheat yosokoneza chipika
- Mipira mu bomba
- Kulumikizana kwamagetsi kwamphamvu kwambiri
- Usodzi
Chifukwa Chosankha Ife:
1. Mutha kupeza zinthu zabwino kwambiri malinga ndi zomwe mukufuna pamtengo wotsika kwambiri.
2. Timaperekanso Reworks, FOB, CFR, CIF, ndi mitengo yobweretsera khomo ndi khomo. Tikukulangizani kuti mugwiritse ntchito zotumiza zomwe zingakhale zotsika mtengo.
3. Zipangizo zomwe timapereka ndizotsimikizika kotheratu, kuyambira pa satifiketi yoyeserera mpaka pagawo lomaliza.
4. chitsimikizo chopereka yankho mkati mwa 24hours (nthawi zambiri mu ola lomwelo)
5. Mutha kupeza njira zina zogulitsira, zoperekera mphero ndikuchepetsa nthawi yopanga.
6. Ndife odzipereka kwathunthu kwa makasitomala athu. Ngati sizingatheke kukwaniritsa zomwe mukufuna mutapenda zonse zomwe mungasankhe, sitidzakusocheretsani popanga malonjezo abodza omwe angapangitse ubale wabwino ndi makasitomala.
Chiwonetsero cha mafakitale
LUMIKIZANANI NAFE
info@zztungsten.com
