ʻO ke kiʻekiʻe kiʻekiʻe 95WNiFe Tungsten paʻa paʻa paʻa ʻole me ka pale ʻaʻahu maikaʻi
1. Hōʻike huahana:
Nā waiwai:
- Kiekie Kiekie: 16.8-18.8g/cm3
- Nā waiwai mechanical maikaʻi
- Modulus kiʻekiʻe o ka elasticity
- Ka hoʻoheheʻe ʻana
- Kiʻekiʻe wela a me ka uila conductivity
- Pale wela kiʻekiʻe
- Hoʻonui wela haʻahaʻa
Papa oʻO ke kiʻekiʻe kiʻekiʻe 95WNiFe Tungsten paʻa paʻa paʻa ʻole me ka pale ʻaʻahu maikaʻi
| Mea 1 | Papa 1 | Papa 2 | Papa 3 | Papa 4 |
| tungsten % | 90 | 92.5 | 95 | 97 |
| Māmā (g/cc) | 16.85-17.25 | 17.15-17.85 | 17.75-18.35 | 18.25-18.85 |
| Paʻakiki (HRC) | 32 | 33 | 34 | 35 |
| E hoʻohana i ka ikaika tensile | ksi | 110 | 110 | 105 | 100 |
| Mpa | 758 | 758 | 724 | 689 |
| Hua ikaika ma 0.2% off-set | ksi | 75 | 75 | 75 | 75 |
| Mpa | 517 | 517 | 517 | 517 |
| Elongation (%) | 5 | 5 | 3 | 2 |
| Mea Hana 2 | Papa 1 | Papa 2 | Papa 3 | Papa 4 |
| Huina | 90W7Ni3Fe | 92W5Ni3Fe | 95W3Ni2Fe | 97W2Ni1Fe |
| ʻO ka mānoanoa (g/cm3) | 17.1±0.15 | 17.50±0.15 | 18.10±0.15 | 18.50±0.15 |
| Hoʻomaʻamaʻa Wela | Hoʻopaʻa ʻana | Hoʻopaʻa ʻana | Hoʻopaʻa ʻana | Hoʻopaʻa ʻana |
| Ikaika U'i (Mpa) | 900-1000 | 900-1000 | 920-1100 | 920-1100 |
| Elongation (%) | 18-29 | 16-26 | 10--22 | 6--13 |
| Paʻakiki (HRC) | 24-28 | 25-29 | 27-32 | 28-36 |
| Mea 3 | Papa 1 | Papa 2 |
| Huina | 90%W, | 95%W, |
| 6%Ni4%Cu | 3.5%Ni |
| 1.5% Cu |
| Māmā (gm/cc; lbs/in3) | 17;0.614 | 18;0.65 |
| Paʻakiki (RC) | 24 | 27 |
| ʻO ka ikaika ʻoi loa (PSI) | 110,000 | 110,000 |
| Hua ikaika, . 2% Offset (PSI) | 80,000 | 85,000 |
| Elongation (% In 1") | 6 | 7 |
| ʻO ka palena elastic like (PSI) | 45,000 | 45,000 |
ʻO nā koʻokoʻo tungsten alloy, WNiFe a me WNiCu, i hana ʻia mai ka pauka metala ma kahi wela kiʻekiʻe, me ka hoʻohana ʻana i kahi ʻenehana metallurgy pauka wela kiʻekiʻe. Ma kēia ala, he haʻahaʻa haʻahaʻa haʻahaʻa ka hoʻonui ʻana o ka tungsten alloy rod material, conductivity thermal maikaʻi a me nā waiwai waiwai maikaʻi.
2. E pili ana i ke kinikini kaumaha Tungsten:
Ma ke kiʻekiʻe wela, hana ke koʻokoʻo tungsten alloy ma ke ʻano he mea me ka helu heheʻe kiʻekiʻe a me ka coefficient haʻahaʻa o ka hoʻonui wela. ʻO ka hoʻohui ʻana o ka tungsten alloy element e hoʻomaikaʻi i ka machinability, ka paʻakikī a me ka welding. Kūkulu ʻia nā waiwai o ka mea ma luna o nā koʻokoʻo tungsten alloy i ka ʻoihana hana e hoʻopau i nā pilikia e pili ana i ka mālama wela o nā mea hana ʻē aʻe.
3. Nā noi:
Kaulike helu no ka VibrationʻO ka hoʻoheheʻe ʻana
Nā ʻili hoʻomalu mokulele
Helicopter rotor Pūnaehana
Nā mea ʻenekini
ʻoihana heihei kaʻa
Nā mea hoʻopaʻa moku
Kaumaha hui kolepa
Nā lima ahi
Nā lāʻau hoʻopaʻa ʻana i ka lua lalo
Nā lāʻau ʻawaʻawa
Hoʻohana lāʻau lapaʻau
4.Advantages: tungsten maʻemaʻe
- Hoʻopili a me nā mea electrode
- Mea wela wela wela
- Poʻo poʻo
- EDM electrode
- Hoʻopili ʻo Arc
Pono: Tungsten kaumaha
- Ke kaulike kaulike
- Mea pani no ka Uranium
- Electroheat upsetting anvil poloka
- Nā kinipōpō i ka pōkā
- Kiʻekiʻe voltage pili uila
- Ka lawaiʻa
No ke aha e koho ai iā mākou:
1. Hiki iā ʻoe ke loaʻa ka mea kūpono e like me kāu koi ma ka liʻiliʻi loa o ke kumu kūʻai.
2. Hāʻawi pū mākou i nā Reworks, FOB, CFR, CIF, a me nā kumukūʻai hoʻopuka puka. Manaʻo mākou iā ʻoe e hana i nā hana no ka hoʻouna ʻana e ʻoi aku ka waiwai.
3. ʻO nā mea a mākou e hāʻawi nei ua hiki ke hōʻoia ʻia, mai ka palapala hōʻike maka a hiki i ka ʻōlelo kikoʻī hope loa. (E hōʻike ʻia nā hōʻike ma ke koi)
4. hōʻoia e hāʻawi i ka pane i loko o 24hours (maʻamau i ka hola hoʻokahi)
5. Hiki iā ʻoe ke kiʻi i nā mea kūʻai ʻokoʻa, nā hāʻawi wili me ka hōʻemi ʻana i ka manawa hana.
6. Hoʻolaʻa piha mākou i kā mākou mea kūʻai. Inā ʻaʻole hiki ke hoʻokō i kāu mau koi ma hope o ka nānā ʻana i nā koho āpau, ʻaʻole mākou e alakaʻi hewa iā ʻoe ma ka hana ʻana i nā ʻōlelo hoʻohiki wahaheʻe e hoʻokumu ai i nā pilina mea kūʻai aku.
Hōʻike hale hana
KĀHEA IĀ MĀ˚OU
info@zztungsten.com
